6.8.3 Number of pedal assist sensor magnets setting
PAS is the pedal assist sensor magnets setting. The adjustable range is: 5-31.
Press the / to select the parameter and press to save the parameter setting and to return to the
personalized parameter setting interface.
Figure 6-11 Pedal assist sensor magnets setting
6.9 Throttle setting
09P is the throttle setting.
6.9.1 Throttle 6KM/H walk boost setting
HL is the throttle 6KM/H walk boost setting. HL-Y is to enable the walk boost and the speed will maintain at 6KM/H
when using throttle. HL-Y is to disable the walk boost and it can reach the max speed when using throttle.
Press the / to select the HL-Y and press to save the parameter setting and return to the personalized
parameter setting interface.
Press the / to select the HL-N and press to save the parameter setting and enter into 6.9.2 Throttle Level
setting interface or long press to return to the personalized parameter setting interface.
Figure 6-12 Throttle 6KM/H walk boost setting
To Next Page
Loading...
