York YHAU-CW - Change Numeric Values

JOHNSON CONTROLS
106
FORM 155.31-ICOM2.EN.UL
ISSUE DATE: 12/21/2018
SECTION 6 – OPERATION
When you press the OPER. button while the chiller is
stopped, or STOP while the chiller is operating, a con-
firmation message appears. Press YES or NO depend-
ing on whether you want to continue or cancel your
selection.
LD21476_UL
• Screen Name Buttons: Located along the bottom
of the screen. These are used to change screens.
The selected button lights when it is active.
CHANGE NUMERIC VALUES
Many numeric values, such as the set point and the
ranges on the Trend screen, can be changed. Here’s
how:
1. Touch the number to be changed. A numeric key-
pad appears.
LD21154_UL
2. Enter the new value on the keypad.
3. Press the ENT button to set it.