JOHNSON CONTROLS
85
SECTION 4 - TECHNICAL DATA
FORM 155.31-ICOM2.EN.UL
ISSUE DATE: 12/21/2018
4
Scope of Delivery
Johnson Controls scope of delivery for the upper com-
munication system covers the control panels for the
upper communication function. The customer is re-
sponsible to deliver all other related equipment: con-
centrator (HUB), installation, wiring, communication
program for the central monitoring unit, and other
relevant communication modes. See Table 15 on page
85.
TABLE 15 - SCOPE OF DELIVERY
ITEM CUSTOMER JCI REMARKS
Control panel with
upper communication
function
X Communication protocol: Modbus TCP
Data concentrator
(HUB)
X Installation and wiring are included
Wiring work for Ethernet
connection
X Apply twisted pair cable
Communication
program for central
monitoring unit
X
See Table 16 on page 85 and Table 17 on
page 86 for the details of the IP address,
function code, communication data ad-
dress, or other applicable communication
addresses.
Connection Port for Ethernet Communication
Make sure that the Ethernet cable is plugged into the
correct port on the Control Panel. The ethernet connec-
tion port is located at the bottom left on the back of the
Control Panel.
TABLE 16 - ETHERNET INTERFACE SPECIFICATION
ITEM SPECIFICATION
Communication format 10BASE-T/100BASE-TX
Connector shape RJ-45 type modular jack connector
LED function
Active
(Green)
Blink Data sending/receiving
No light No data sending/receiving
Link
(Green)
Blink Data sending/receiving via
10BASE-T/100BASE-TX
No light No connection or successor job failure
To Next Page
Loading...
