JOHNSON CONTROLS
148
SECTION 8 - MICROPANEL
Form 201.28-NM1.1
Issue date: 08/06/2021
Sound limit setpoint
PROGRAM
SOUND LIMIT SETPOINT = XXX %
This indicates the sound limit setpoint programmed at
the time of the fault, if the sound limit option is activat-
ed at the factory. If the option is not factory activated,
the display will not appear.
Eductor differential temperature
PROGRAM ◄DEF XXXXX LO XXXXX HI XXXXX
EDUCTOR DIFFERENTIAL = XXX °F
This message indicates the programmed eductor dif-
ferential temperature at the time of the fault.
Eductor safety time
PROGRAM ◄DEF XXXXX LO XXXXX HI XXXXX
EDUCTOR SAFETY TIME = XXX MIN
This message indicates the eductor safety time pro-
grammed at the time of the fault.
Motor temperature unload
PROGRAM ◄DEF XXXXX LO XXXXX HI XXXXX
MOTOR TEMPERATURE UNLOAD = XXX °F
This message indicates the motor temperature pro-
grammed at the time of the fault.
To Next Page
Loading...
