York YVAA Style A - Unit Rigging Specifications; Rigging Hole Locations

JOHNSON CONTROLS
26
SECTION 3 - RIGGING, HANDLING, AND STORAGE
Form 201.28-NM1.1
Issue date: 08/06/2021
LD18582
Table 1 - Unit rigging
YVAA model
Description Units
Rigging holes
Frame Cond Evap A B C D E F G H
015 3 B
Rigging hole
location
in. 18 60 116 192
mm 464 1512 2937 4866
016 5 B
Rigging hole
location
in. 18 60 137 214
mm 464 1533 3482 5435
017 8 C
Rigging hole
location
in. 12 73 144 197 260
mm 314 1845 3654 5012 6593
018 3 A
Rigging hole
location
in. 18 60 143 220
mm 464 1533 3636 5598
019 5 A
Rigging hole
location
in. 18 60 143 227 272
mm 464 1533 3636 5761 6920
019 8 B
Rigging hole
location
in. 18 60 137 215 302
mm 464 1533 3484 5455 7670
020 0 C
Rigging hole
location
in. 18 60 131 214
mm 464 1518 3332 5430
021 3 A
Rigging hole
location
in. 18 60 143 227 272
mm 464 1533 3637 5761 6920
021 5 C
Rigging hole
location
in. 12 73 144 197 260
mm 314 1845 3654 5012 6593
021 8 C
Rigging hole
location
in. 12 73 163 254 324
mm 314 1845 4144 6443 8218
Note: Rigging and lifting the unit must be done safely by a professional rigger as discussed in this section. The rigger should locate the center of
gravity through trial lifts to account for possible variations in unit conguration. Contact your nearest Johnson Controls Sales O󰀩ce for weight data.