York YVAA Style A - Print Key for Data Reporting; Printout Types and Selection

SECTION 8 - MICROPANEL
JOHNSON CONTROLS
161
Form 201.28-NM1.1
Issue date: 08/06/2021
8
LD10605
Print key
Print key
Print key operation
The PRINT key is used to initiate a printout of cur-
rent operating data (real time data), a complete history
printout of all history (fault) buffers, a printout of all
normal shutdowns (compressor cycling, chiller shut-
down, and so on), or history (fault) data printout of a
specific fault. History Buffer 1 will always be the most
recent fault history printout. Printing may also be can-
celed by selecting the CANCEL PRINTING option.
The following message is displayed when the PRINT
key is pressed.
PRINT CHOOSE PRINT REPORT
◄ ► XXXXXXXXXXXXXXXXXXXXX
After pressing the PRINT key, the printout type is
        
(RIGHT ARROW) keys until the desired printout is
displayed.
The following table shows the available printout types.
Table 25 - Printout types
Printout types
Operating Data
(Default Selection)
All History Bu󰀨ers
Normal Shutdowns
History Bu󰀨er 1
History Bu󰀨er 2
History Bu󰀨er 3
History Bu󰀨er 4
History Bu󰀨er 5
History Bu󰀨er 6
History Bu󰀨er 7
History Bu󰀨er 8
History Bu󰀨er 9
History Bu󰀨er 10
Cancel Printing
The specific printout is initiated by pressing the 
(ENTER) key.