Need help?Do you have a question about the zapco HDSP-V Series and is the answer not in the manual?
General| Model | HDSP-V Series |
|---|---|
| Input Channels | Varies by model |
| Output Channels | Varies by model |
| Input Types | Varies by model |
| Output Types | Varies by model |
| Signal-to-Noise Ratio | >110dB |
| Input Voltage | Varies by model |
| Input Voltage Range | Varies by model |
| Equalization | Parametric, Graphic |
| EQ | Parametric, Graphic |
| Crossover Types | Butterworth, Linkwitz-Riley, Bessel |
| Crossover | Butterworth, Linkwitz-Riley, Bessel |
| THD+N | <0.01% |
| Total Harmonic Distortion | <0.01% |
| S/N Ratio | >110dB |
Details the exceptional performance metrics of the HDSP-V, including noise floor and crosstalk.
Explains how internal modules like DACs can be upgraded for customization and improved performance.
Details the various input connections available on the HDSP-V AD-A, including digital and analog options.
Describes the output connections and the integrated dash board control unit.
Guides users through downloading and installing the PC control software.
Addresses driver installation and potential compatibility issues with Windows operating systems.
Instructions on how to connect the PC to the HDSP for software configuration.
Guides on setting input gain and using clip LEDs for optimal signal-to-noise ratio.
Explains the Delay page for correcting speaker positioning and arrival times.
Guides on measuring distances, calculating delays, and setting up delay groups for accurate sound staging.
Explains the Crossover page for setting high-pass and low-pass filters for each speaker.
Details the advanced equalizer with parametric bands for fine-tuning audio response and pairing.
Guides on ensuring all speakers are in phase for optimal system tuning and sound staging.
Outlines the standard procedure for checking and performing firmware updates for the HDSP processors.
To Next Page
