44
1. You can remove the Right Ch information from the Left channel and remove the Left Ch information
from the Right channel by reversing the phase of the added channel. So Right is added out of phase to
the Left and Left is added out of phase to the Right, without the center channel information. The rear
information is no longer the same as the front information.
2. Secondly, you need to be able to provide enough delay so the rear information arrives when it
would in a hall or stadium environment. While most processors give you 20 to 25ms of delay, the HDSP
processor give you up to 50, or even 100ms of delay so you can make the ambient effect feel as large
as you want.
CRITICAL NOTE For Loop Function: When using the Loop Function, the loop must originate from Channels 9~16,
and be looped back into Channels 1~8.
See WHY THE LOOPS WORK AND HOW in the next pages.
To Next Page
Loading...
Need help?
General
