Page 5
2 SPECIFICATION
2.1 TECHNICAL SPECIFICATIONS - "DUALAC2"
Inverter for pairs of AC asynchronous 3-phase motors
Regenerative braking functions
Can-bus interface
Digital control based upon a microcontroller (one per each motor)
Voltage: .................................................................................. 24 - 36 - 48 - 72 - 80V
Maximum current (24V): ........................................ 350A (RMS) for 3' per each motor
Maximum current (36/48V): ................................... 275A (RMS) for 3' per each motor
Maximum current (72/80V): ................................... 200A (RMS) for 2' per each motor
Operating frequency: ..........................................................................................8kHz
External temperature range: ................................................................. -30°C ÷ 40°C
Maximum inverter temperature (at full power): .................................................... 75°C
BLOCK DIAGRAM
To Next Page
Loading...
