Zapi DUALAC2 - 5.6 Programming Console Functions

Page 60
5.6 PROGRAMMING CONSOLE FUNCTIONS
5.6.1 Functional configuration (see 5.4)
5.6.2 Parameter programming (see 5.5)
5.6.3 "Dualac2" and "Dualac2 Power" Tester: user can verify the state of the fol-
lowing parameters:
MASTER SLAVE
motor voltage (%) motor voltage (%)
frequency (Hz) frequency (Hz)
encoder (Hz) encoder (Hz)
slip value (Hz) slip value (Hz)
current rms (A) current rms (A)
temperature (°C) temperature (°C)
temperature #1 (°C) seat switch (ON/OFF)
temperature #2 (°C) forw. switch (ON/OFF)
accelerator (V) back. switch (ON/OFF)
steer angle (°) enable switch (ON/OFF)
brake pedal poti (%) voltage booster (%)
int wheel cutback (%) battery voltage (V)
seat switch (ON/OFF)
forw. switch (ON/OFF)
back. switch (ON/OFF)
enable switch (ON/OFF)
brake switch (ON/OFF)
cutback switch (ON/OFF)
exclusive hydro (ON/OFF)
hand brake (ON/OFF)
voltage booster (%)
battery voltage (V)
battery charge (%)