Zapi ZAPIMOS HP 350A - Parameter Configuration and Adjustment

To Next Page

To Previous Page

Pagina 13

4 . PARAMETER MODIFICATIONS4 . PARAMETER MODIFICATIONS

4 . PARAMETER MODIFICATIONS

Modification of the parameters, in addition to the configuration of the inputs, is made directly

by ZAPI on customer specifications, or the customer may make adjustments himself using the

programming console or the mini-console, with which only certain parameters to be modified.

The console can remain connected to the chopper when running and the parameters can also be

varied in real time during operation.

To confirm data, press ENTER when requested by the message on the console.

The parameters thus modified and optimised on one unit can be stored from the console

(SAVE) and then reloaded (RESTORED) on another chopper, thus allowing fast and

standardised calibration (see console manual for details).

Pay special attention to the polarity of the console connector when it is hooked up to the chop-

per.

HOOKING UP MUST ONLY BE DONE WITH THE MACHINE OFF.

4.2 PROGRAMMING CONSOLE

4.3 MINI-CONSOLE

Related product manuals