Pagina 15
4.2 PROGRAMMABLE CONSOLLE FUNCTION DESCRIPTION
The digital consolle display the model type and its built in hourmeter.
Model selection PUMP Standard
PUMP + HYDRO
Option selection PIN G3 bypass/field weakening
Battery free/check
HOURS running/key on
PIN G5 status/main contactor
Battery selection 24/36/40/48V, 60/72/80/96V + fine adjustment
Programmable parameters Acceleration
Deceleration
Max current
Creep speed
Weak dropout
Hydroguide delay
Hydroguide speed
Hydroguide compensation
Non-fine speed regulation 1/2/3/4
Fine speed regulation 1/2/3/4
Tester VMN 1/3 BATT
Input E1 - E7
Potentiometer input
Motor current
Chopper temperature
Battery voltage
Motor voltage
Save function Parameter memory
Restore function Loading parameter on the chopper
Alarm Display of in-memory alarm
Program Vacc Potentiometer stroke parameter
To Next Page
Loading...
