Connector Part Numbers
The mating connector for the I/O:
PLUG:
CONN PLUG CPC 28POS REV SER 2 – Tyco Electronics – Part #206039-1 (Digi-Key #A1380-ND)
BACKSHELL:
CONN CABLE CLAMP CPC SIZE 17 – Tyco Electronics – Part #206070-8 (Digi-Key #A32516-ND)
PINS:
CONN PIN 24-28AWG GOLD CRIMP –Tyco Electronics – Part #66507-4 (Digi-Key #A23004CT-ND)
The plug, back shell, and pins will be supplied if a cable is not purchased at time of manufacture.
Pre-wired cables from Zaxis:
Part number# ISC-ESA031-26-A, (16ft length standard)
To Next Page
Loading...
