Timers Isaac uses microprocessor timers to establish time intervals for a variety of test functions. Time values are
set in Isaac’s
Program
screen by the user to control coupling time, fill time, settle time, and test time. Timers are
calibrated in seconds with a maximum setting of 999.9 seconds. See
Program Screen
.
Units of Measure Isaac can display pressure, flow, and time in several user-selectable measurement units.
Changing units of measure is made through the
Setup
screen.
Valves Isaac contains modular solenoid valve blocks that direct the flow of air (or other gas) through measurement
circuits. The number, type, and arrangement of valves in an Isaac tester can be customized for special
applications.
To Next Page
Loading...
