36
Zaxis Inc. LLC
801.264.1000
2442 South 2570 West
West Valley City, UT 84119
5.7
Ethernet Settings.
ASCII Data Over the Ethernet
Test data can be collected via the Ethernet connection on the rear panel of the
Isaac PD.
To collect data on a laptop, you will need a crossover Ethernet cable and a termi-
nal emulation program, such as HyperTerminal.
Fig. 17. TCP/IP Settings Screen.
!
If your primary network connection is done wirelessly,
you will need to connect the cable from the Isaac to your
laptop and cycle the power (turn off/turn on) on the Isaac.
Verify that the Ethernet from the socket is active by looking
for a green light inside the machine, towards the bottom of the
Ethernet jack.
!
To Next Page
Loading...
