Zaxis Isaac PD - 6 Reference; Test Tooling and Fixtures

38
Zaxis Inc. LLC
801.264.1000
2442 South 2570 West
West Valley City, UT 84119
6
Reference.
To achieve accurate and repeatable results, tested units must be presented to the tester
in the same fashion every time. The tooling must also be robust enough to withstand
daily repeated use.
The following are some key points to keep in mind in your tooling and xture designs:
• Operator Safety
» Zero-access, No pinch points
» Ergonomically designed
» Simple load/unload
• Material Selection
» Stainless Steel
» Anodized Aluminum
» Delrin, etc.
• Sealing Forces — Exerted forces should not mask possible leaks.
• Single or Multi-purpose — Should the tool be dedicated to a single task or t
multiple models?
• Size — How much production space do you have?
• Component Selection — Custom designed pieces or off-the-shelf technology?
Zaxis can deliver a complete turn-key system designed to your specications.
6.1
Test Tooling and Fixtures.