ZCS AZZURRO CONNEXT - Adding and Managing Wallboxes

Solo documento principale.
49/67
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Connext User Manual
Rev. 2.2 10/01/2023
Figure 56 - Adding measuring sensors
7.4. Adding and managing wallboxes
NB: the wallbox is recognised automatically. Make sure it is powered and set on Plug&Play.
If the wallbox is added later, it can be registered using the serial number.
Figure 57 - Adding a wallbox