• DO NOT install the charging station near flammable materials.
• DO NOT install the charging station in an area where flammable or
explosive materials are stored.
• Take into account the weight of the charging station during
transport and installation.
• Choose an appropriate mounting position and surface.
3.1. Checks before installation
Checking the outer packaging
Packaging materials and components may be damaged during transport. Therefore, please check the
materials of the outer packaging before installation. Check the surface of the box for external damage
such as holes or tears. If any form of damage is detected, do not open the box and contact the supplier
and the courier as soon as possible.
It is also recommended that you check the contents of the packaging and make sure that they
correspond to what was declared. If not, contact your dealer to have any missing parts sent to you.
Checking the product
After removing the system from its packaging, check that the product is intact and complete. If any
damage is found or components are missing, contact the supplier and transport company.
To Next Page
Loading...