ZCS AZZURRO CONNEXT - Page 63

Solo documento principale.
63/67
Identification: MD-AL-GI-00
Rev. 1.2 07.06.21 - Application: GID
Connext User Manual
Rev. 2.2 10/01/2023
Figure 70 - RFID card control screen
3) To add charge-enabling cards, select '1. Add Card' and place the RFID card in front of the symbol
below.
Figure 71 - Add card screen
Up to 8 RFID cards can be registered. The same card can be used to register more than one wallbox.
1. Add Card
2. Remove Card
Supports up to 8
cards
Existing: x
Swipe to add card