Zeagle N2ition - Dive Mode Data and Warnings

23
depth and setting FO
2
value.
• Dive time: This is the dive time.
• Maximum depth: This is the maximum depth recorded during a dive. If depth is over 99.9m(328ft),
this display is ‘---’. In Gage Mode, if depth is over 199.9m(656ft), this display is ‘---’.
• Pressure of oxygen (PO
2
): This indicates the PO
2
value at the current depth. This value is calculated
based on fraction of oxygen and the current depth.
• PGT (Pressure Gas in Tissue) graph: This indicates the level of Nitrogen with nine level indicators.
• OLI (Oxygen Limited Indicator) graph: This indicates the level of Oxygen limit with eight level
indicators.
• Maximum depth Alarm Icon: When it sets max depth alarm to on, this Icon is on.
• Dive time alarm Icon: When it sets dive time alarm to on, this Icon is on.
• Nitrox Icon: This Icon is ON when NITROX has been used for MIX1 or MIX2.It blinks if the MIX1 and
MIX2 setting is the default setting.
• Gage mode Iconl: In gage mode, the Icon is on.
• Safety Stop time:It displays stopping time. A count is downed from 3'00".
• Decompression stop depth(Ceiling): The decompression stop depths are calculated according to the
dive mode settings. (3-99m/10-320ft)
• Decompression stop time(DECO STOP TIME): This is the amount of time to be spent at a
decompression stop depth, which is calculated according to the dive mode settings. A countdown is
shown during decompression.
• Total ascent time(TOTAL): This indicates the total amount of time required for ascent from the current
depth to the surface, assuming that decompression stops are made
• DECO Icon:It is the Icon which informs to be in the decompression condition.
• Fraction of oxygen(=FO
2
) :It displays the FO
2
which was set in dive set mode.
<Various warning>
• Ascent rate warning: When surfacing beyond the ascent rate according to the depth, it informs with
the display and the alarm. It continues until it becomes the water depth which is shallower than 1.5 m
(5 feet). This information is recorded in the dive log, when the second warning appears within 6
seconds after first warning.