Zeagle N2ition - Dive Mode Warning Indicators

24
<Ascent rate warning>
• Decompression dive warning: When the NDL is exceeded and the mode is changed to decompression
dive mode, this warning generates. This information is recorded in the dive log.
<Decompression dive warning>
• Decompression stop violation warning: When current depth is shallower than the indicated
decompression stop depth, it informs with the display and the alarm. If returning to the indicated water
depth, the display blink stops. This information is recorded in the dive log.
<Decompression stop violation warning>
• OLI warning:
When the OLI graph reaches 7 or 8, it informs with the display and the alarm. There are two types of
warnings, as described below.
a. Graph value = 7: It informs with the display and the alarm. This information is not recorded in
the dive log.