Zeagle N2ition - Dive Mode Warning Details; OLI, PO2, and Default Warnings

25
b. Graph value = 8 it informs with the display and the alarm. The blinking display continues until
the graph value reaches 7. This information is recorded in the dive log.
<OLI warning>
• PO
2
warning:
The Pressure of oxygen (PO
2
) value is determined based on the set oxygen ratio and the current
depth. When the PO
2
value exceeds a certain value, the information is recorded in the dive log
when the PO
2
warning occurs once. The types of settings and warnings are described below.
a.When PO
2
=1.4: The warning display blinks and alarm is sounded.
(Case setting MIX1)
b. When PO
2
=1.6 or more: The warning display blinks and an alarm is sounded. The entire OLI graph
blinks. (Case setting MIX1 and MIX2)
<PO
2
warning>
• Default warning: When the MIX1 is set at the default value, an alarm will sound when dive mode
starts. It blinks even if it moves to dive mode until it sets MIX1, it continues to blink.