Charging the Battery
The scanner offers two different ways to charge the battery: USB Cable or Cradle.
To charge the battery using the cradle:
1. Connect the cradle.
2. Place the scanner on the cradle. You will hear a short beep sound from the
scanner indicating scanner is in contact with the cradle.
3. The battery begins charging when the scanner LED indicator starts flashing green.
LED turns steady green when charging is complete.
Approx. charging time: 4.5 hours
To charge the battery using the USB cable:
There are two method to charge scanner via USB cable.
Host USB Power
Power adaptor
Connect the mini USB connector directly to the scanner.
1. Connect the other end of the USB connector to the host to begin charging. You
can also connect the USB cable to an outlet using the power adapter to charge the
battery.
2. The bat
tery begins charging when the scanner LED indicator starts flashing green.
LED turns steady green when charging is complete.
Approx. charging time: 5~6 hours
14
To Next Page
Loading...
