Zebex Barcode scanner - Default Parameters

19
Default Parameters
Parameter Default
Radio communication
Wireless host Cradle Host
Pairing mode Unlocked
Data transmit Normal
Radio protocol timeout 5 seconds
Power off timeout 20 minutes
Encryption Enable
Cradle Host
RS-232 communication
Baud rate 9600
Parity none
Data bits 8
Stop bit 1
RTS/CTS off
Terminator <CR><LF>
Keyboard Wedge Communication
Terminator PC/AT
Keyboard US keyboard
Terminator Enter(Alpha numeric)
USB Communication
Terminator Enter
Code mode Scan code
Keyboard US keyboard
Wand Emulation
Wand emulation speed Normal
Data output Black=high
Pair contact on cradle Enable
Scanner
Decoder Selection Default
EAN/UPC Enable
CODE 39 Enable
Code 32 Disable
CODABAR Enable
ITF 2 OF 5 Enable