Additional Recording Features
/ \
POWEm
IIO_ i,Ig.Ct
IIIC.IIll
_ VRLA11C • 4H£ADS(DA) .0_ SCREEN PROGRAMMING • HQ _ _LI'.
f
A. Recording Length of time.
B=
Press and hold down REC/ITR until REC lights in the
VCR message center. The VCR will continue record-
ing until you press PAUSE or STOP; if you press STOP
the VCR will turn off. If you wish to specify a length of
time to record see item A. Instant Timer Recording
page 8-1.
Recording one TV Program While Watching Another
While recording press TV/VCR on the remote control
to turn off the VCR indicator in the VCR message
center. Then tune the TV to the desired channel. (To
return to VCR tuning press TV/VCR again, the VCR
indicator will light again.)*
C. Edit During Recording
Press PAUSE at any time to stop recording momentari-
ly. The REC symbol in the VCR message center will
begin flashing. Press PAUSE again to resume record-
ing. (Using the Pause mode, while recording, instead
of the Stop mode will eliminate video "noise" between
recorded segments when the tape is played back.)
D. Recording Speed
Repeated presses of the SP/LP/EP button will change
the recording tape speed either before or during the
recording setup process. (See Additional Operations,
for Tape Recording Speed Chart.)
*Cable TV companies that supply subscribers with a converter/descrambler box use a
wide diversity of antenna, VCR, cable/converter box to TV connections. Please refer to
your cable company's service department for their options available for recording/watch-
ing the same program.
TV VCR MODE
r---i r---1 C_
SELECT QUIT
®®®
®®®
®®®
Q ( )
0
R..A,_,a(
CHANNEL
IN
VOLU_E
CD
_ (=D C=D
C:::D _ C:::D
STOP _ SEAI_H
7--2
26O9-O
To Next Page
Loading...
