II II II i l i rl .
Additional Operations
o
Press "0" to zero the counter at that loca-
tion. Press MEMORY to be able to return
Counter Memory is ON
Press MEMORY key
to turn Memory off
(To remove this display
press the QUIT key)
to that location on the tape. The following
display will appear when counter memory
is on.
5. Press QUIT to remove counter display.
To Return to a Desired Point
1. Press STOP.
2. Press REW. The tape will rewind to the
selected zero memory position.
Index Search
Index Search works like an electronic bookmark.
Each time you start a recording, an index mark is
placed on the control track of the video tape,
where it will not interfere with the audio or
video. During Play mode or Stop mode, you can
access any one of these marks (up to a total of 99)
either in fast forward or reverse.
To Start Index Search:
From the PLAY or STOP mode:
1. Press SEARCH on the remote control. The
following display will appear on the TV
screen:
For Index Search:
Code ....
1-Enter index code
Example: 2/not 02
2-Press F FWD/REW key
(To remove this display
press the QUIT key)
2. Press a numbered key that corresponds to
the number of index marks to be passed on
the way to the Index destination from the
present tape location. (Up to 99 marks can
be detected on an individual tape.)
3. Using the remote control press either F FWD
or REW briefly. If either key is held down
too long, the fast forward or rewind mode
will engage.
The tape advances or rewinds past the
number of index marks entered. Playback
begins automatically from that mark.
To Stop Index Search
Press PLAY or STOP.
NOTE: If the end of the tape is reached during
search, the Index mode is cancelled and the tape
rewinds.
21,o9_o 10 -- 2
To Next Page
Loading...
