n'_1_llllli rlr i ] i L
Service Information
Timer recording is not possible.
Timer has not been programmed
correctly.
[TMR indicator is not on in VCR
lmessage center.
Repro[gram timer. [
Press TIMER to set VCR into Timer
mode.
Some channels are skipped over when
scanning channels.
Tuning Problems
Th9se channels are preset to be skipped. Restore channels to channel search
sequence; select SAVED next to
channel Skipped/Saved.
Channel cannot be switched. VCR set to Timer Mode. Press TIMER to release VCR from
Timer Mode.
Picture and sound are weak or missing. Antenna cable is loose. Tighten connections or replace cable.
Maintenance
Video Head Cleaning
After long periods of use, the video heads may become clogged with accumulated dirt, causing distor-
tion. When this occurs, use do-it-yourself wet head cleaning cassettes available through your Zenith
dealer.
Caution: Do not use dry head cleaning systems. They may seriously damage both the video recorder
and cassette. When visual signs appear (snow, streaking in picture and horizontal pulling of picture) in-
dicating the need for video head cleaning, please see your Zenith approved service center.
Cabinet Cleaning
The outside surfaces of the video recorder may be cleaned with a soft lint-free cloth as required. Use
care not to scratch the VCR message center window during cleaning.
2_o 11 - 2
To Next Page
Loading...
