Zennio FLAT - Annex II: Communication Objects Reference

Flat & Flat 55
http://www.zennio.com Technical Support: http://support.zennio.com
46
ANNEX II. COMMUNICATION OBJECTS
”Functional range” shows the values that, with independence of any other values permitted by the bus according to the object size, may be of any
use or have a particular meaning because of the specifications or restrictions from both the KNX standard or the application program itself.
Notes:
 Flat 55 does not incorporate the internal temperature probe, nor the 6-button model, so objects applicable to these characteristics will not be
available.
 The objects shown in this table are from model Flat 6. Note that certain objects will not be available in models with less push buttons.
Number
Size
I/O
Flags
Data type (DPT)
Functional Range
Name
Function
1
1 Bit
C T - - -
DPT_Trigger
0/1
[Heartbeat] Object to Send '1'
Sending of '1' Periodically
2
1 Byte
I
C - - W -
DPT_SceneNumber
0-63
[General] Scene: Receive
0 - 63 (Run Scene 1-64)
3
1 Byte
C T - - -
DPT_SceneControl
0-63; 128-191
[General] Scene: Send
0 - 63/128 - 191 (Run/Save Scene 1-64)
4
1 Bit
I
C - - W -
DPT_Enable
0/1
[General] Touch Locking
0 = Unlock; 1 = Lock
1 Bit
I
C - - W -
DPT_Enable
0/1
[General] Touch Locking
0 = Lock; 1 = Unlock
5
1 Bit
C T - - -
DPT_Switch
0/1
[General] Welcome Back Object
Switch Object Sent on Wake Up
6
1 Bit
I
C - - W -
DPT_Enable
0/1
[General] Sounds - Disabling Button Sound
0 = Disable Sound; 1 = Enable Sound
1 Bit
I
C - - W -
DPT_Enable
0/1
[General] Sounds - Disabling Button Sound
0 = Enable Sound; 1 = Disable Sound
7
1 Bit
I
C - - W -
DPT_Ack
0/1
[General] Sounds - Doorbell
1 = Play a Doorbell Sound; 0 = Nothing
1 Bit
I
C - - W -
DPT_Ack
0/1
[General] Sounds - Doorbell
0 = Play a Doorbell Sound; 1 = Nothing
8
1 Bit
I
C - - W -
DPT_Alarm
0/1
[General] Sounds - Alarm
1 = Play Alarm Intermittent Sounds; 0 = Stop Alarm
Sounds
1 Bit
I
C - - W -
DPT_Alarm
0/1
[General] Sounds - Alarm
0 = Play Alarm Intermittent Sounds; 1 = Stop Alarm
Sounds
9
1 Bit
I
C - - W -
DPT_Switch
0/1
[General] Welcome Back Object - Additional
Condition
Additional Condition Object 1
10
1 Bit
I
C - - W -
DPT_Switch
0/1
[General] Welcome Back Object - Additional
Condition
Additional Condition Object 2
11
1 Bit
I
C - - W -
DPT_Switch
0/1
[General] Welcome Back Object - Additional
Condition
Additional Condition Object 3
12
1 Bit
I
C - - W -
DPT_Switch
0/1
[General] Welcome Back Object - Additional
Condition
Additional Condition Object 4