Zepro Z3N - Battery and Cable Requirements

8
Product overview
www.zepro.com
1.3 Battery and cable requirements
For proper function of the tail lift the electrical system needs to be sized per the following:
Item 12V 24V
Minimumbatterycapacity(I
min
) 140Ah N/A
Minimum voltage during operation (U
min
) 9V N/A
Cross sectional area of power cable, length up
to 8m
25mm
2
N/A
Cross sectional area of power cable, length
8-15m
35mm
2
N/A
Cross sectional area of power cable, length
over 15m
N/A N/A
Thegivencrosssectionalareasarevalidforcoppercables.Ifotherconductormaterialisusedproperconver-
sion needs to be made in order to properly size the connection. The total length of the cable is measured
accordingtothefollowinggure.
Some vehicle models have restrictions regarding the amount of current the lift can access from the existing
battery.Somevehiclemodelsdonotfullychargethebattery.Itmaythereforebenecessarytoswitchtoabat-
tery and sometimes also to a charger with a larger capacity.