ZiLOG System 8000 Hardware Reference Manual

HRM
Zilog
HRM
logs, and initializes the CPU. After completing these
initial functions, the executive function is available
for interactive use.
3. The tape maintenance machine code supports addition and
deletion of tests stored on the SADIE tape and updates
the test catalog.
4 The diagnostic tape library contains object code files.
An object code file contains the object code for a
stand-alone test. A maximum of 25K bytes of memory is
allocated to each object code file. This limit is
necessary to allow the SADIE machine code to be
coresident and to provide room for the stack that grows
downward from the end of the segment.
5. The diagnostic library catalog contains all information
necessary to identify the test, prepare for its execu-
tion, and load it. Included are the test name (1 to 8
characters), a short description of the test (1 to 40
characters), declarations of base (decimal, hexade-
cimal, or octal) and default values for up to four in-
teger parameters, a functional classifi~ation of the
test, and its file and track location on the tape.
6. The test list library contains test lists that have
been stored ..
7. The test list catalog contains a one- to 50-character
description of each test list.
5.13. SADIE Program Initialization
To initialize SADIE:
1. Insert the tape cartridge into cartridge tape drive.
2. pr e s s RES ET.
3. En ter T< C R> •
4 •
En t er Z T<C R> •
This command executes the monitor-resident primary tape
bootstrap routine that loads the SADIE bootstrap routine and
transfers control to SADIE. After the bootstrap process is
complete, a command level menu is displayed on the CRT that
includes the version of SADIE that is present.
5-46
Zilog

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English