ZiLOG System 8000 Hardware Reference Manual

HRM Zilog
HRM
D DISPLAY error log
A display cumulative error log of ALL tests in list
M perform tape MAINTENANCE functions
Q QUIT
Enter your choice J=>
After this menu appears, the desired function can
be selected by keying in its letter code
in response to the prompt "Enter your choice J=>" and
pressing <CR>.
The following descriptions are presented in the same se-
quence as they appear in the COMMAND LEVEL menu. If a
function has subcommands, they are detailed before
proceeding to the next description. This allows for all
the information of one function to appear together for
convenient reference.
5.15.1. Command Level T: Choose and run a single TEST:
General Description:
CRT Display Contents:
Optional Commands:
A test can be chosen from the first
CRT display.
A second menu displays th~ avail-
able control lines. in either
case, once a test or control line
is chosen, a subsequent CRT display
allows for parameters and repeti-
tion count to be changed.
** CHOOSE A TEST OR CONTROL LINE **
Followed by a list of test numbers
and corresponding titles
Optional available commands for
this display are:
5-52
Command
+
Zilog
Description
CRT displays next page of
available tests.
CRT displays preceding
page of available tests.
CRT displays the test
of control lines.
Select the test number of
5-52

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English