ZiLOG System 8000 Hardware Reference Manual

HRM Zilog
HRM
The P and # commands appear only
when the test has parameters to be
set. E appears only in insert
mode. I appears only if this menu
was reached immediately after the
user chose a test.
T SUBCOMMAND LEVEL: Reset REPETITION Count
General Description:
CRT Display Contents:
Optional Commands:
This function allows the user to
specify the number of times a par-
ticular test function is to be run.
The current value of the repetition
count is displayed, followed by a
prompt for a new value. A new
value can be entered. Entering
only <CR> leaves the count un-
changed.
***** SET REPETITION COUNT *****
Optional available commands in this
mode are:
Command . Description
o Test runs until START
button is pressed
# A number # of iterations
expressed in decimal
notation between 1 and 9999
Return to·CHOOSE A TEST
or CONTROL LINE (leave
repetition count unchanged)
T SUBCOMMAND LEVEL: PARAMETERS
General Description: Parameters that specify the condi-
tions under which a test is per-
formed can be changed. The current
value of a parameter is displayed,
and the SADIE prompt for a new
value of type hexadecimal or de-
cimal. Entering only <CR> leaves
the value unchanged.
5-54
Zilog
5-54

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English