ZiLOG System 8000 Hardware Reference Manual

HRM Zi10g
HRM
CRT Display Contents:
Optional Commands:
after the test has been loaded un-
til the user signals a scratch tape
has been installed and the -proper
command is entered. Upon comple-
tion, the scratch tape is rewound
and removed, and the SADIE tape
should be re-installed.
***** RUN CURRENT TEST LIST *****
followed by the first seven lines
of the test list at the top of the
screen and a menu at the bottom.
Optional available keyboard com-
mands in this mode are:
Command
<CR>
S
Description
Execute list beginning
at current li,ne.
START execution at
line 1
Make line # the CURRENT
line (>1)
Return to COMMAND LEVEL
5. 15.4. Command Level C: CHOOSE and run a test list::
General Description:
CRT Display Contents:
The catalog of test lists is
displayed and one is selected and
fetched from the SADIE tape. A
second menu then appears, which is
the same as that described in sec-
tion 5.15.1, except that ~ returns
to the C command level, not the
COMMAND LEVEL.
***** CHOOSE A TEST LIST *****
Followed by a list of test-list
numbers, and short descriptions of
test lists.
5-56
Zilog
5-56

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English