ZiLOG System 8000 Hardware Reference Manual

HRM
Zilog HRM
E SUBCOMMAND LEVEL: R - REPLACE line x:
General Description: A test or control statement, in-
cluding parameters and repetition
count, are chosen and installed in
the test list that replaces the
selected line contents.
CRT Display Contents: ** CHOOSE A TEST OR CONTROL LINE **
Optional Commands: The choices available are the same
as those described in paragraph
5.15.1 under CHOOSE A TEST OR CON-
TROL L1NE, except that ~ returns to
the EDIT level.
on line x
General Description: The number of repetitions or value
of any parameter can be changed.
CRT Display: ** RESET TEST LINE (OPTIONAL) **
Optional Commands: The choices available are the same
as those d~sqribed in paragraph
5.15.1 under CHOOSE A TEST OR CON-
TROL LINE, except that ~ returns to
the EDIT level.
E SUBCOMMAND LEVEL: I - INSERT line(s) before line x:
General Description: A line is inserted before the
selected line. The list is
displayed again, centered above the
originally selected line. This
procedure continues as long as new
lines are entered.
CRT Display: ** CHOOSE A TEST OR CONTROL LINE **
Optional Commands: The choices available are the same
as those described in paragraph
5.15.1 under CHOOSE A TEST OR CON-
TROL LINE, except that ~ returns to
the EDIT level, and there is an ad-
ditional command, E, that Exits in-
sert mode ..
5-60
Zilog
5-60

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English