ZiLOG System 8000 - Page 321

HRM
COMMAND: REWIND
DB3cription
Zilog
, HRM
This command 1"ewi~ds the tape to the logical
beginning of tape.
Dependencies
The tape must be at, or beyond, the logical begin-
ning of tape.
Examp1 e
REWIND
COMMAND: SEL selent
Description
Controller selects A new drive (address selent,
selcnt=O-3) .
Dependencies
None
Ex ampl e
SEL
COMMAND: SKBF skpcnt
Descriptio~
This command skips Cskpcnt) blocks forward on the
tape, or until either a file mark or the end of
tape is detected.
Dependencies
A-gO
Tape must be at, or
beginning-of-tape.
Ex ampl e
Z110g
beyond, the
logical
A-gO