ZiLOG System 8000 Hardware Reference Manual

HRM
TEST NAME
Zilog
HR~1
NEWMEM3 - a thorough n-cell-coupling test of memory segments
PARAMETERS
maxseg=maximum segment number to be tested (default:3)
minseg=minimum segment number to be tested (default=O)
DESCRIPTION
NEWMEM3 is a slow, but thorough, n-cell-cQupling test. It
fla"gs problems the other memory tests may not reveal. The
test takes approximately 20 minutes per segment tested.
NEWMEM3 repeats n times, wheren=#REPs in the tA3t li~e.
NEWMEM3 relocates the code segm.ent the salne a3 NE\n-1Ei-11.
ERROR MESSAGES
NEWMEM3 displays a DATA ERROR message for each error. T~e
error me s sage gi v es th e add re s s whe r e th e t: r rl);" ,)C (~d:-:-ed ,
the value written (GOOD=xxxx), and the incorrect value read
back (BAD=xxxx).
All NEWMEM3 errors are repor~ed to SADIE 33 HARD errors.
LAP SUMMARY
At the conclusion of e8ch test repetition, the last 19 error
messages are displayed. The errors accumulate from one
repetition to another.
NOTES
NEWMEM3 turns the MMUs ON during the test. If NEWMEM3 indi-
cates errors, SADIE diagnostic MMUTST5 or the SYSTEM POWER-
UP DIAGNOSTI CS (S PUD) shaul d be run to en sure i:,h e ~r'1U::;
int8g~ity.
A-103
Zilog
A-103

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English