ZiLOG System 8000 Hardware Reference Manual

HRM
TEST NAME
S'16SIO
PARAMETERS
None
DESCRIPTION
Zilog
HRr~
S16310 is an interactive, menu-driven test of t.he 3103 and
CTCs not used by the console. (SADIE uses SIO no, Cha~nal
B, to communicate with the co~sole. The test aS3umes that
SIO II 0, Channel B, i. s func t ioning . )
A c 1'10 ice 0 nth e t e 3 t rn en u J..3 t:) \~;( _~, :.:,; 1'~ ~ - ~ ') ~~ • T~l i 3 i 3 the
only way the test ;;;hould be exited; DO NOT PRESS "START" TO
EXIT.
This test requires an auxiliary terminal,. referred to by the
test as AUX. The user selec ts . the SIO to be tested, a:l::l t~1e
test prompts the user to plug AUX into a specified port on
the system rear panel. Entering <CR> on the console signals
the test to proceed~
The AUX terminal must not be connected to TTYO until SADIE
-transfers control to 816310.
The test proceeds by displaying the entire set of ASCII
printable characters continuously, until any key is pressed
on the con sol e . Th en the t est i s i !1 nee h 0 In 0 d G ", and any
character pressed on AUX is echoed back to AUX by the test.
Pressing any key on the CONSOLE termi'1ates "echo mode", and
returns to the 316SIO menu.
ERROR MESSAGES
None
LAP SUMMARY
Not applicable.
A-107
Zilog
A-107

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English