ZiLOG System 8000 Hardware Reference Manual

HRM
2ilog
HRM
If the number of errors forced = the number detected and
reported, no ECC errors have occurred.
3) Memory test:
a) number of trials the memory test has completed
b) numbers of data errors (data read does not equal
data written)
c) number of 1-bit errors reported by the ECC.
(data read = data written, but error count regis-
ter indicates an error was corrected).
NOTES
Test 3 may show spurious errors if memory has not been ini-
tialized after power on. To be sure memory is initialized,
enter the T command to the Prom Monitor before booting SADIE
with the Z T command. Alternately, memory can be initial-
ized by running NEWMEM2 on segments 0 through maxseg.
A-120
2ilog
A-120

ZiLOG System 8000 Specifications

General

Brand	ZiLOG
Model	System 8000
Category	Desktop
Language	English