802742UK - G4 IS IT industrial installation instructions - Jan. 2016 - V2.03 Page 25 of 32
4.5 HydroTap
®
G4 industrial models
Installation instructions
Note The braided hoses and connection tubes supplied with the tap head assembly and cold inlet CANNOT
be lengthened. Also ensure that the (factory fitted) bypass tube assembly is fitted in place if the booster
and / or external filter are not used.
Not required for HydroTap
®
G4 models.
Note Ambient mains
water braided hose length
is 750mm.
Electrical power cable
length is 3.0m nom.
Position the Command-
Centre
TM
according to the
hose and cable lengths
supplied.
Clearance envelope
535mm
COLD isolation valve
(not supplied)
535mm
RED
CLEAR
BLUE
BRAIDED
CHILLED
OUTLET
MAINS
IN
MIXER
OUT
MIXER
IN
BOILING
OUT
BYPASS
IN
VENT
BYPASS
OUT
Options
POWER
CABLE
USB
Booster option
3 button
side touch
2 button
side touch
2 button
top touch
Note All silicon tubes / plastic pipes must be cut to
size. They must have a constant fall back to the
Command-Centre
TM
To Next Page
Loading...
