802742UK - G4 IS IT industrial installation instructions - Jan. 2016 - V2.03 Page 5 of 32
Thank you for purchasing a Zip HydroTap
®
G4. Please read and follow these instructions carefully to ensure
safe and trouble free operation. If help and advice is required, please call 0845 6 005 005 or 0345 6 005 005.
What is the Zip HydroTap
®
G4 ?
This Zip HydroTap
®
G4
is an electronically controlled, filtered, boiling and chilled water drinking system for
the industrial environment. The HydroTap
®
G4 systems are under counter drinking water appliances with
a dispensing tap mounted on a sink or worktop, which has been designed for industrial applications. The
HydroTap
®
G4 utilises a conventional refrigerant compressor to chill the water and an immersion heating
element to boil the water. The boiling and chilled models will dispense boiling water (factory set to 98°C)
chilled water (factory set to 5-9°C). These units are NOT designed to be used as sanitary fixtures.
The Zip HydroTap
®
G4
models which dispense boiling water (except those using the two button side touch tap)
are fitted with a tap mounted safety lock. In addition, there are various energy saving options accessible via
the main menu. The system is equipped with a self-calibrating program which caters for altitude adjustment.
The water filter is a disposable item which will require periodic replacement and is covered by a limited OEM
warranty.
It is important that the installation be undertaken safely, correctly and completely in order to utilise all the
benefits that the HydroTap
®
G4
can provide.
Legacy mode
The Industrial series of taps require the G4 Command-Centre
TM
to be set in legacy mode prior to initial
operation.(See section 5 for details).
Legacy mode is enabled / disabled in the service section of the main menu. Please note this is password
protected. Please call 0845 6 005 005 or 0345 6 005 005 for details.
General product features
Command-Centre
TM
To Next Page
Loading...
