Zip HYDROTAP G4 series - HydroTap Control Styles; Elite Touch Controls; Classic Press-Pull Controls; Arc & Cube Turn Controls

802742UK - G4 IS IT industrial installation instructions - Jan. 2016 - V2.03 Page 3 of 32
HydroTap
®
G4 specifications
Installation check list .................................................................................................................... 4
General product features ............................................................................................................. 5
Important safety instructions ........................................................................................................ 6
Warnings and regulatory information ........................................................................................... 7
Major components and accessories ............................................................................................. 8
Technical specifications ............................................................................................................... 9
Before installation and site requirements ..................................................................................... 10
Installation instructions
Step 1 - Measure and cut all the tap holes before fitting the taps.
Section 1 - Tap installation.
1.1 - HydroTap
®
G4 generic requirements ........................................................................ 11
1.2 - HydroTap
®
G4 Industrial side touch installation ........................................................ 12
1.3 - HydroTap
®
G4 Industrial top touch installation .......................................................... 12
Step 2 - Check for adequate ventilation.
Section 2- Ventilation.
2.1- Ventilation for all models.............................................................................................13-14
Pull out templates for side touch taps ..............................................................................15-18
Step 3 - Install the booster and / or filter / softener (if required).
Section 3 - Booster installation.
3.1- Booster specifications and descriptions ..................................................................... 19
3.2- Installation procedure ................................................................................................. 20
3.3- Booster installation ..................................................................................................... 20
3.4- Braided hose connections .......................................................................................... 21
3.5- Filter / softener installation ......................................................................................... 22
Step 4 - Install the Command-Centre
TM
.
Section 4 - Command-Centre
TM
installation.
4.1- Check the external bypass valve setting ................................................................... 23
4.2- Fit the mains water supply hose ................................................................................ 23
4.3- USB connection ......................................................................................................... 24
4.4- Connecting the water supply ...................................................................................... 24
4.5- HydroTap
®
G4 industrial models................................................................................. 25
Step 5 - Commission the HydroTap
®
G4.
Section 5 - Commissioning.
5.1- Select language ........................................................................................................ 26
5.2- Filter flush ................................................................................................................. 26
5.3- Flow calibration .......................................................................................................... 27
5.4- Boiling calibration ....................................................................................................... 27
5.5- Booster activation ...................................................................................................... 27
5.6- Legacy mode ............................................................................................................. 28
Trouble shooting
Trouble shooting table .................................................................................................................. 29
End of life disposal ....................................................................................................................... 30
Warranty ....................................................................................................................................... 31
Contact details ............................................................................................................................. 32
Index