SmartLPR
®
Access User Manual Installation
Quercus Technologies 19
2.2. Rear plate capture
2.2.1. Rear plate capture
In installations for rear plate capture, we recommend installing a presence detector before the
one installed in line with the ticket dispenser. In this way you make sure that the camera captures
the license plate when the vehicle releases the first sensor (called “LPR sensor” in the drawing).
The recommended distance between the camera and the LPR sensor is 2,5m.
2.2.2. Queue management in installations for rear plate capture
In installations for rear plate capture, the best way to manage situations when queues are
formed is by installing a speed bump in line with the camera and before the LPR sensor that
triggers the capture. This way, a vehicle that enters after the first one must slow down and it
won't interfere in the capture taken of the first vehicle.
To Next Page
Loading...
Need help?
General