17
Direct Connection
To connect Atlas-400 with a PC directly, connect both devices with a straight network
cable. As the Atlas-400 supports auto MDI/MDIX, it is not necessary to use a crossover
type cable.
ETHERNET
ETHERNET
Atlas x00 Series Access Control Panels Installation Guide
Ethernet Connection
LAN Connection
Important Notes:
1. Both 10Base-T and 100Base-T are supported.
2. This cable distance must be less than 330 ft. (100m).
3. For cable length of more than 330 ft. (100m). use HUB to amplify the signal.
Figure 21
Figure 22
CAT5e or CAT6 ethernet
cable recommended
To Next Page
Loading...
Need help?
General
