To Next Page

To Previous Page

Atlas Bio Series Access Control Panels Installation Guide

1. Understanding the Atlas Series Network

All Atlas Series systems have a single “Primary” controller. Many “Secondary” controllers may be added to support

additional doors. All secondary controllers maintain a connection to the primary, and the primary provides all

data and conguration, the secondaries need to operate.

The primary controller has a Web Management Application you can log into from a web browser. Through this

application you can congure the entire system.

Important: The primary controller must support biometrics if any biometric controller is used in the system.

Requirements

1. Obtain an available static IP address and conguration from the network administrator.

2. (Optional) Obtain a signed HTTPS certicate. This provides some additional security and avoids web browser

warning messages. The supported certicate formats are PEM or PFX. Check “Optional Installations” for

more details.

3. Make sure whether using Network Time Protocol(NTP) to automatically update the controller's clock over

the Internet is possible and acceptable. Also, make sure whether non-standard time servers are used (such

as Corporate time servers). With a typical small network, it is safe to assume NTP will work with default Atlas

Series settings.

Help

This guide provides you online help for the detailed operation of the controller. The help is available once you

have connected the primary controller and logged in to the Web Management Application. Open the help

guide by selecting “Help” from the menu in the upper right corner.

Procedure

1. Understand how an Atlas Series system networks together by reading the brief section under “Understanding

the Atlas Series Network”.

2. Connect a computer directly to a controller and run the initial conguration program. This step must be

completed before the controller operates on the network.

3. Connect the controller to the local network.

4. Log in to the Web management application and complete the basic conguration.

5. Add a user and test door access.

6. Add any secondary controllers as required.

ZKTeco Atlas Bio Series User Manual

Questions and Answers: