To Next Page

To Previous Page

Atlas Bio Series Access Control Panels Installation Guide

The available conguration options depend on the Controller model. Each option involves one or more of the

following possibilities. Each possibility determines the functions of the readers connected to the controller. The

conguration can be modied during “Hardware Conguration”.

• In Only - This is the most common conguration, in which a reader is used to obtain access to enter, but no

credentials are required to exit (although an exit button may be congured for opening the door from the

inside). All controllers will have at least one “In” reader. It cannot be congured for another purpose, though

you may choose not to use it.

• In/Out - The physical door will have a reader both inside and outside. Authorization is required to access in

either direction.

• Muster Point - The reader will serve as a muster point, where users can register that they have reached a

safe location.

• Card Enrollment Point - The reader will be used to easily enter the card numbers when adding users.

Page 5: Time Zone (Primary controller Only)

Select your time zone. In most cases you never need to set the actual time; the controller will get the time from

the internet using NTP protocol. Other possibilities are discussed, under “Review Time Setting (optional)”.

Note: The Secondary controllers get their time and time zone from the primary controller.

ZKTeco Atlas Bio Series User Manual

Questions and Answers: