ZKTeco SpeedFace-V3L (Lite) User Manual

SpeedFace-V3L(Lite) User Manual
P a g e
|
62 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
Verification Mode
The supported verification mode includes
Password/Card/Face, User ID Only, Password, Card
Only, Password + Card, Password/Card, Face Only, Face
+ Password, Face + Card.
Door Available
Time Period
It sets the timing for the door so that the door is
accessible only during that period.
Normal Open Time
Period
It is the scheduled time-period for "Normal Open"
mode so that the door is always open during this
period.
Master Device
While configuring the master and slave devices, you
may set the state of the master as Out or In.
Out:
A record of verification on the master device is a
check-out record.
In: A record of verification on the master device is a
check-in record.
Slave Device
While configuring the master and slave devices, you
may set the state of the slave as Out or In.
Out:
A record of verification on the slave device is a
check-out record.
In: A record of verification on the slave device is a
check-in record.
Speaker Alarm
It transmits a sound alarm or disassembly alarm from
the local. When the door is closed or the verification is
successful, the system cancels the alarm from the local.
Reset Access
Setting
The access control reset parameters include door lock
delay, door sensor delay, door sensor type, verification
mode, door available time period, normal open time
period, master device, and alarm. However, erased
access control data in Data Mgt. is excluded.

ZKTeco SpeedFace-V3L (Lite) Specifications

General

Brand	ZKTeco
Model	SpeedFace-V3L (Lite)
Category	Intercom System
Language	English