ZOLL PD 2000 - Page 59

SERVICE MANUAL
PD™ 1400-SERIES STATUS MESSAGES (CONTINUED)
Error Type of
Number Description Problem
STATUS 134 MON_CASE error (diagnostic mode only). EPU
monitor
STATUS 138 Excessive change in defib cap energy as Defib
measured by CPU. Not a real error- module
diagnostic purposes in diagnostic mode only
STATUS 140 CPU DEFIB - XSAFE Request was not * CPU defib
echoed back by the EPU. module
STATUS 150 The CRT gate array program has overflowed | EPU
its allotted storage. display
: manager
STATUS 160 CPU Stripchart Reset failed. Stripchart
STATUS 161 CPU Stripchart Echo Test failed. Stripchart
STATUS 162 Stripchart took too long to respond to Stripchart
command (diagnostic mode only).
STATUS 163 ECG data buffer underflow (diagnostic Stripchart
mode only).
STATUS 164 ECG data buffer overflow (diagnostic mode | Stripchart
only).
STATUS 165 CPU Strip Chart Overtemperature Error. Stripchart
STATUS 166 CPU Strip Chart Voltage is too high. Stripchart
Tres