Zoom B2 FOUR - Bass Polyphonic Pitch Shifter

12 13
Effect Types and Parameters
[ PITCH SHIFT ]
BASS
POLYPHONIC
PITCH
SHIFTER
This pitch shifter for bass supports chord playing.
SHIFT Adjusts the pitch shift amount in semitones. -24 – 12
TONE Adjusts the tone. 0 – 100
WET Adjust the amount of the effect sound in the mix. 0 – 100
DRY Adjust the amount of the original sound in the mix. 0 – 100
[ SYNTH ]
BASS
SYNTHESIZER
ZOOM original bass synthesizer sound.
MODE Sets direction of movement of the filter. UP, DOWN
SENSE Adjusts the sensitivity for trigger detection. 0 – 100
ATTACK Adjusts the attack speed. 0 – 100
RANGE Adjusts the amount of cut-off frequency modulation. 0 – 100
RESO Sets effect resonance. 0 – 100
OCT Adjusts the level of the one-octave lower sound component. 0 – 100
BALANCE Adjusts the balance between original and effect sounds. 0 – 100
VOL Adjusts the volume. 0 – 100
Z-SYNTHESIZER This bass synthesizer sound adds analog synth fatness.
FREQ Sets the cut-off frequency of the lowpass filter. 0 – 10
RANGE Adjusts the amount of cut-off frequency modulation. 0 – 20
DECAY Adjusts the speed of tone modulation. 0 – 100
RESO Sets effect resonance. 0 – 20
WAVE Selects the waveform.
SAW,
SQUARE
TONE Adjusts the tone. 0 – 10
BALANCE Adjusts the balance between original and effect sounds. 0 – 100
VOL Adjusts the volume. 0 – 100
BASS TALK
SYNTHESIZER
This effect for bass produces a synthesizer sound similar to a talking modulator
producing vowels.
TYPE Selects a vowel variation.
IA, UE,
UA, OA
SENSE Adjusts the sensitivity for trigger detection. 0 – 100
ATTACK Adjusts the attack speed. 0 – 100
RESO Sets effect resonance. 0 – 100
TONE Adjusts the tone. 0 – 10
OCT Adjusts the level of the one-octave lower sound component. 0 – 100
BALANCE Adjusts the balance between original and effect sounds. 0 – 100
VOL Adjusts the volume. 0 – 100