Zoom B2 FOUR User Manual

12 13
Effect Types and Parameters
[ MODULATION ]
BASS
PHASER
This phaser is good for bass frequencies.
COLOR Sets the sound color. 1, 2
DEPTH Sets the depth of the modulation. 0 – 100
RATE Sets the speed of the modulation. 0 – 100
RESO Sets effect resonance. 0 – 100
THE VIBE This vibe sound features unique undulations.
SPEED Sets the speed of the modulation. 0 – 50
DEPTH Sets the depth of the modulation. 0 – 100
MODE Sets effect to vibrato or chorus.
VIBRT,
CHORS
VOL Adjusts the volume. 0 – 100
[ PITCH SHIFT ]
BASS
OCTAVER
This effect adds sound one octave below the original sound.
OCT Adjusts the level of the one-octave lower sound component. 0 – 100
LO Adjusts volume of low frequencies. 0 – 10
HI Adjusts volume of high frequencies. 0 – 10
DRY Adjusts the volume of the unaffected sound. 0 – 100
BASS
ANALOG
OCTAVER
This simulates an analog octaver. Modulation can be applied to the octave below,
adding depth to the sound.
OCT1 Adjusts the level of the sound one octave below the effect sound. 0 – 100
OCT2 Adjusts the level of the sound two octaves below the effect sound. 0 – 100
MOD Sets how much the octave below sound is modulated. 0 – 100
DRY Adjusts the volume of the unaffected sound. 0 – 100
PITCHSHIFT This effect shifts the pitch up or down.
SHIFT Adjusts the pitch shift amount in semitones. Selecting "0" gives a detuning effect. -12–12, 24
FINE Allows fine adjustment of pitch shift amount in Cent (1/100 semitone) steps. -25 – 25
TONE Adjusts the tone. 0 – 10
BALANCE Adjusts the balance between original and effect sounds. 0 – 100
BASS MONO
PITCH
SHIFTER
This pitch shifter was designed specifically for playing single notes in the bass
frequency range.
SHIFT Adjusts the pitch shift amount in semitones. Selecting "0" gives a detuning effect. -12 – 12, 24
FINE Allows fine adjustment of pitch shift amount in Cent (1/100 semitone) steps. -25 – 25
TONE Adjusts the tone. 0 – 10
BALANCE Adjusts the balance between original and effect sounds. 0 – 100
HARMONY
PITCH
SHIFTER
This intelligent pitch shifter outputs the effect sound with the pitch shifted according
to scale and key settings.
SCALE Sets the pitch of the pitch-shifted sound added to the original sound.
-6, -5, -4, -3,
-m, m, 3, 4, 5,
6
( See Table 1 )
KEY Sets the tonic (root) of the scale used for pitch shifting.
C, C#, D, D#,
E, F, F#, G, G#,
A, A#, B
TONE Adjusts the tone. 0 – 10
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100

Zoom B2 FOUR Specifications

General

Type	Bass Multi-Effects Processor
MIDI I/O	No
Presets	50 user presets, 50 factory presets
Amp Modeling	Yes
Inputs	1 x 1/4" Instrument
Power Source	4 x AA batteries
Display	LCD
Outputs	1 x 1/8" headphone output