Zoom B2 FOUR - SB Preamp 1; BBB Preamp; Super Low Preamp; Djent Preamp

10 11
Effect Types and Parameters
[ PREAMP ]
SB PREAMP 1 This is a preamp model with a 3-band equalizer.
BASS Adjusts volume of low frequencies. 0 – 10
MID Adjusts volume of middle frequencies. -10 – 10
TREBLE Adjusts volume of high frequencies. 0 – 10
VOL Adjusts the volume. 0 – 100
BBB
PREAMP
This is a simulation of the Xotic Bass BB Preamp.
GAIN Adjusts the gain. 0 – 100
BASS Adjusts volume of low frequencies. -10 – 10
TREBLE Adjusts volume of high frequencies. -10 – 10
VOL Adjusts the volume. 0 – 100
SUPER LOW
PREAMP
This original amp model achieves extremely low frequencies.
GAIN Adjusts the gain. Changes the ENHNC effect. 0 – 100
ENHANCE Emphasizes low frequencies. 0 – 100
SUB Adjust the volume of one octave down. 0 – 100
LO Adjusts volume of low frequencies. 0 – 100
MID Adjusts the volume of middle frequencies. 0 – 100
HI Adjusts volume of high frequencies. 0 – 100
BALANCE Adjusts the balance between the original sound and the effected sound. 0 – 100
VOL Adjusts the volume. 0 – 100
DJENT
PREAMP
This original amp model combines a distortion-free low end with an extremely distorted
high end. This is perfect for Djent sounds using basses with 5 or more strings.
BASS Adjusts volume of low frequencies. 0 – 100
LO-MID Adjusts the volume of lower middle frequencies. 0 – 100
HI-MID Adjusts the volume of higher middle frequencies. 0 – 100
TREBLE Adjusts volume of high frequencies. 0 – 100
HIBOOST Turns boost ON/OFF in the high frequencies. OFF, ON
LOCUT Sets the cut-off frequency in the low range.
OFF,
20 Hz – 120 Hz
GAIN Adjusts the gain. 0 – 100
VOL Adjusts the volume. 0 – 100
[ MODULATION ]
CLONE
CHORUS
This analog chorus sound models the Electro-Harmonix SmallClone.
DEPTH Sets the depth of the modulation. 1, 2
RATE Sets the speed of the modulation. 0 – 100
TONE Adjusts the tone. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100
CHORUS
ONE
This models the sound of a BOSS CH-1 SUPER CHORUS.
DEPTH Sets the depth of the modulation. 0 – 100
RATE Sets the speed of the modulation. 0 – 100
TONE Adjusts the tone. 0 – 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 – 100